How To Flash CWM Recovery On Oppo Find 7 X9007

How To Flash CWM Recovery On Oppo Find 7 X9007

Oppo Find 7 is a top high end smartphone from Oppo manufacturer, this smartphone is packed with the topnotch hardware which will give you the best performance at every aspect. This device is packed with a QUAD HD Display which gives you the 1440x2560 resolution at 534 ppi, which is the highest resolution display now adays. 32 GB Internal Storage, 3 GB RAM, 13 Megapixel Camera, 5 Megapixel Front Camera, 4.3 Jellybean and it is also powered by a 2.5 Ghz Quad Core CPU from Qualcomm, this CPU will boost your device performance to the peak of its usability. 

Now we had a little introduction about this high end device so now we are going to flash a custom recovery called "ClockWorkMod" (CWM) Recovery which will give us the ability to Root the device, Flash ROMs, Flash ZIP package files which include themes, system apps etc. It also erase the data/cache/factory reset and wipe the dalvik cache. It have also the ability to write some other type of permissions. Get ready to Flash CWM Recovery On Oppo Find 5.


Before You Begin:(must do)
1. You should install drivers for you device, Connect your device to PC, and you will see a Window with file "setup.exe" open that file and Install it. 


Downloads:
1. Fastboot
2. X9007_CWM_Recovery.img (download the CWM Recovery image)


Arranging Files:
1. Now download the above both files, fastboot.zip and X9007_CWM_Recovery.img.
2. Extract the fastboot.zip file and move the X9007_CWM_Recovery.img to the extracted fastboot folder.
3. Make sure your Recovery file should be in the Fastboot folder.


Installation:
1. Now turn off your Oppo Find 7
2. Restart your phone in fastboot mode by pressing and hold Volume Up + Power Button at the same time, don't leave the buttons until you see a word Fastboot then leave the buttons.
3. In fastboot mode connect your phone to PC via USB Cable.
4. Hold Shift and Mouse Right Click On the Fastboot folder in the PC, and click Open Command Window Here.
5. When you see a command window so just type the following code: 

fastboot flash recovery X9007_CWM_Recovery.img

and hit Enter button.
6. You will see a success message which is similar to this finished total time: 0.628s that means your device is successfully flashed with a custom Recovery.
7. To Go into Recovery mode, Press and Hold Volume Down + Power Button at the same time, don't leave buttons until you see the device vibrates then it will start in recovery mode.


Having Problems:
1. If you are having problem in restarting in it fastboot mode, Keep trying again Volume Up + Power Button at the same time, you will start it in fastboot mode.
2. If your device is successfully in fastboot mode and after entering the code in command window and you get the reply 

waiting for device

So that means your drivers are missing, so please try fixing the drivers issue.